Linear ball bearing flange LMEK-30-UU
Sliding scale prices
- 1-3 units
- per 18,40 EUR
- 4-7 units
- per 17,48 EUR
- 8-19 units
- per 16,56 EUR
- > 19 units
- per 14,72 EUR
Linear ball bushing with flange
Type: LMEK-30-UU, Seals on both sides - normal length
with one bearing
| Part No. | Main Dimensions and Tolerance | Radial Clearance (max μm |
Basic Load Rating C Co N N |
Weight (g) |
|||||||||
| Seal Type | dr (mm) |
Tolerance (μm) |
D (mm) |
Tolerance (μm) |
L ±0.3 (mm) |
D1 (mm) |
H (mm) |
PCD (mm) |
K (mm) |
||||
| LMEF12UU | 12 | +8 / -0 | 22 | 0 -13 |
32 | 42 | 6 | 32 | 32 | -4 | 510 | 784 | 80 |
| LMEK12UU | 12 | 22 | 32 | 42 | 6 | 32 | 32 | 510 | 784 | 80 | |||
| LMEF16UU | 16 | +9 -1 |
26 | 36 | 46 | 6 | 36 | 35 | 578 | 892 | 103 | ||
| LMEK16UU | 16 | 26 | 36 | 46 | 6 | 36 | 35 | -4 | 578 | 892 | 103 | ||
| LMEF20UU | 20 | 32 | 0 -16 |
45 | 54 | 8 | 43 | 42 | -6 | 862 | 1370 | 182 | |
| LMEK20UU | 20 | 32 | 45 | 54 | 8 | 43 | 42 | 862 | 1370 | 182 | |||
| LMEF25UU | 25 | +1 1-1 |
40 | 58 | 62 | 8 | 51 | 50 | 980 | 1570 | 335 | ||
| LMEK25UU | 25 | 40 | 58 | 62 | 8 | 51 | 50 | -6 | 980 | 1570 | 335 | ||
| LMEF30UU | 30 | 47 | 68 | 76 | 10 | 62 | 60 | -8 | 1570 | 2740 | 560 | ||
| LMEK30UU | 30 | 47 | 68 | 76 | 10 | 62 | 60 | 1570 | 2740 | 560 | |||
| LMEF40UU | 40 | +13 -2 |
62 | 0 -19 |
80 | 98 | 13 | 80 | 75 | 2160 | 4020 | 1175 | |
| LMEK40UU | 40 | 62 | 80 | 98 | 13 | 80 | 75 | -8 | 2160 | 4020 | 1175 | ||
technical notes:
*the load capacities are valid only if hardened (min 670 HV) and ground shaft raceways are used
-Each linear ball bearing reached its correct operating clearances generally only installed in the housing with the correct hole!
-Housing units are generally supplied greased. If only the linear ball bearing buy, please consider the greasing!