Main page
»
Shaft Guidance Systems
»
Pre drilled shafts
»
Predrilled shafts in X46Cr13
»
WKB30-M10-150-S Predrilled shaft, hardened X46Cr13, fix length

WKB30-M10-150-S Predrilled shaft, hardened X46Cr13, fix length
Precision shaft Ø 30h6 in X46Cr13, predrilled M10 x 17 in pitches of 150mm, cut to requested length
Product data:
Material: X46Cr13
hardened: min. 52 HRC Rht min.0,9
grounded Tol. h6 (0-13my)
surface roughness: Ra <= 0,3
weight: 0,89kg/m
predrilled size: M10 x 17
predrilled (radial) pitches: in steps of 150mm, tol. + / - 0,2mm
Product data:
Material: X46Cr13
hardened: min. 52 HRC Rht min.0,9
grounded Tol. h6 (0-13my)
surface roughness: Ra <= 0,3
weight: 0,89kg/m
predrilled size: M10 x 17
predrilled (radial) pitches: in steps of 150mm, tol. + / - 0,2mm
General information about Radial Drilled Shafts in X46Cr13:
Using X46Cr13 as a material for radially drilled shafts can also help reduce costs, as it is a relatively inexpensive material that still has high strength and corrosion resistance.
Für nur geschnittene Fixlängen gelten folgende Längentoleranzen:
Schnitttoleranzen für Fixlängen | ||||
Länge in mm: | ||||
30 bis 10001 | 1001 bis 2000 | 2001 bis 4000 | 4001 bis 8000 | |
Toleranz in mm: | -0 / + 1 | - 0 / + 2 | -0 / + 4 | - 0 / + 6 |
- Datasheet drilled bars (142.38 KB)